Basic Info.
Transport Package
Wooden Case
Product Description
MODEL: CBD18 KD /CBD 20KD
4t Electric Pallet Truck
Model | | CBD18KD |
Battery type | | 1 set side way battery |
Load capacity/rated load | Q(kg/lbs) | 1800/4000 |
Load centre distance | c(mm/inch) | 600/23.6 |
Load distance, centre of drive axle to fork | x(mm/inch) | 856/33.7 | |
Fork height, lowered | h13(mm/inch) | 84/3.3 |
Tyre size, front | mm/inch | Φ250×70/Φ10×2.8 |
Tyre size, rear | mm/inch | Φ80×70/Φ3.2×2.8 |
Addition wheel(dimensions) | mm/inch | Φ114×60/Φ5×2.2 |
Wheels, number front rear(x=driven wheels) | | 1X+2/4 |
Max.lift height | h3(mm/inch) | 204/8.03 |
Height of tiller in drive position min./max | h14(mm/inch) | 780/1230(30.7/48.4) |
Overall length | l1(mm/inch) | 1651/65 | |
Length to face of forks | l2(mm/inch) | 500/19.7 |
Overall width | b1(mm/inch) | 682/26.8 |
Fork dimensions | s/e/l(mm/inch) | 54 × 150 × 1150(2.1×5.9×45) | |
Width overall forks | b5(mm/inch) | 550/22 | |
Aisle width for pallets 1000×1200 crossways | Ast(mm/inch) | 1863/73.3 | |
Aisle width for pallets 800×1200 crossways | Ast(mm/inch) | 1913/75.3 | |
Turning radius | Wa(mm/inch) | 1367/53.8 | |
Travel speed,laden/unladen | Km/h | 5.5/5.6 |
Battery voltagem,nominal capacity K5 | V/Ah | 24/160 | |
Battery weight | kg/lbs | 160/353 | |
Battery box dimensions | mm | 645×148×560 |
Service weight(with battery) | kg/lbs | 520/1146 |
Model | | CBD20KD-II |
Battery type | | swing-out battery |
Load capacity/rated load | Q(kg/lbs) | 2000/4400 |
Load centre distance | c(mm/inch) | 600/23.6 |
Load distance, centre of drive axle to fork | x(mm/inch) | 935/36.8 | |
Fork height, lowered | h13(mm/inch) | 82/3.2 |
Tyre size, front | mm/inch | Φ250×70/Φ10×2.8 |
Tyre size, rear | mm/inch | Φ82×126(98)/Φ3.2×5(3.85) |
Addition wheels(dimensions) | mm/inch | Φ127×57/Φ5×2.2 |
Wheels, number front rear(x=driven wheels) | | 1X+2/2(4) |
Max.lift height | h3(mm/inch) | 202/8 |
Height of tiller in drive position min./max | h14(mm/inch) | 780/1230(30.7/48.4) |
Overall length | l1(mm/inch) | 1805/71 | |
Length to face of forks | l2(mm/inch) | 555/21.9 |
Overall width | b1(mm/inch) | 775/30.5 |
Fork dimensions | s/e/l(mm/inch) | 54 × 180 × 1220/2.1×7×48 | |
Width overall forks | b5(mm/inch) | 550/685(22/27) | |
Aisle width for pallets 1000×1200 crossways | Ast(mm/inch) | 2165/85 | |
Aisle width for pallets 800×1200 crossways | Ast(mm/inch) | 2165/85 | |
Turning radius | Wa(mm/inch) | 1550/61 | |
Travel speed,laden/unladen | Km/h | 5.5/5.6 |
Battery voltagem,nominal capacity K5 | V/Ah | 24/200 | |
Battery weight | kg/lbs | 128/281 | |
Battery box dimensions | mm | (245×190×252)×4 |
Service weight(with battery) | kg/lbs | 620/1367 |
SAFETY AND PRODUCTIVITY:
Advanced AC control system sliminats the motor brushes and directional contactors,which makes the minimal maintenance requirements. Intelligentized regenerative brake system: increase overall truck performance by decreasing battery charge intervals.
Side-way battery with roll-out system is very convenient to replace batteries.
Emergency reversing device.
Built-In pressure relief valve protects the trucks from overloads.
Long handle tube suppors flexible and laborsaving operation.
Emergency power disconnect.
Low speed switch in the handle.
Stepless speed control
STRUCTURAL:
Water-proof and dust proof vertical driving wheel offers small turning radius.
The riser axle located at the highest point of forks,protects riser axles from constant contact by uneven floors,Pull rod design against bending.
Spring-loaded castors improve lateral stability on uneven floors and enhance truck perfermance and service life.
Fromed heavy gauge steel fro maximum strength forks
SERVICEABILITY:
Low battery protection setting prolongs the battery life/
CANbus technology reduces wiring conplexity.
All pivot points have grease fitting and serviceable bushing, reducing component-wearing.
Address:
B 302, Huida Business Park, 495#Shangzhong Rd., Xuhui District, Shanghai City
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Service, Transportation
Management System Certification:
ISO 9001, ISO 14001, QC 080000, SA 8000
Company Introduction:
Our company focus on machinery, especially warehouse machinery, such like forklift, truck, tractor, aerial work platform and stacker.
Our team care about the quality, but we care about after-sale service very much as well!
High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
To perfect our service, we accept your supervision and criticism!
Thanks!