1-18m Single Cylinder Single Arm Rail Type Freight Elevator

Model: LZSJD-S
1-18m Single cylinder single arm rail type  freight elevator





Product introduction:
Single - cylinder single arm guide type lifting ladder is mainly used for transportation of high altitude goods between floors. Mainly used in light weight, small size. The environment load of 1 tons, increased height of 1-18 meters. Indoor and outdoor installation can guide rail type lifting elevator, lifting height, with a side cylinder, smooth running, low noise, convenient maintenance and long service life.

Advantage:

1. When power outage, manual emergency drop can be used. It is safe, convenient, fast and practical.
2, the depth of the pit is 15cm, the height is not restricted, can be customized according to the site environment with.
3. It is suitable for 2-3 storey concrete building, which can be used inside and outside.
4. A joint pump station and an imported pump station in Italy are used in pumping stations. If the speed is too high, a joint venture pump station is adopted to meet the desired delivery requirements.
5, oil cylinder and sealing parts are imported parts to solve the unstable oil pressure and oil leakage of the parts.
6. The oil cylinder is built on the platform.
7. Optional heavy wire rope wheel or aggravated special chain to ensure safety.
8. The automatic insurance in the process of rising ensures the security of the platform.
9. The rising process synchronizer ensures that the platform is not overturned.
10, the optional alarm set before falling to the ground ensures the safety of the operator.
11. Chain or wire rope fracture protection device.
12. The oppressed explosion-proof protection device of hydraulic system is optional.
13, select the elevator special flat layer permanent magnet switch, the flat layer effect is good.
14. The distance between the heavy load and the empty load is small, the level of the flat layer is high and easy to adjust.
15, the standard elevator control board, the liquid crystal display call box, the related wiring harness and the connector can be selected. Beautiful appearance, easy to operate, visualizations of the floor position of the car, the wiring harness is connected by the connector, and the control has automatic and manual control.
16, 24V safety control voltage;
17, selecting rolling guide boots, high precision, anti wear and smooth lifting.

Well path advantage
1. There is no machine room on the top of the well.
2, single cylinder single arm rail type lift ladder does not set the counterweight device to improve the utilization rate of the area of the well.
3. The load and load of the single guide rail chain lift and lift are directly affected by the oil cylinder to the foundation pit and the wall, the brick structure or the brick concrete structure.
Safety and stability advantage
1, overflow valve: can prevent the upward movement of the system pressure is too high.
2, emergency manual valve: when the power failure, the platform can be reduced to the nearest floor position.
3, pipeline rupture valve: when the hydraulic system pipeline breakdown lift platform stall drops, can automatically cut off the oil road to stop down.
4, fuel tank temperature protection: when the oil temperature in the tank exceeds the standard setting value, the oil temperature protection device will signal and suspend the lifting platform. When the oil temperature drops, it can start the lifting platform.
5, the failure rate is low: due to the use of advanced hydraulic system and good control mode, the operation failure rate of the lifting platform can be reduced to the lowest.
6, less power consumption: hydraulic lifting ladder down, by the pressure produced by self weight, large energy saving.